205Ah Encoder Boot Value Function Tip: This object only has a function when using an absolute encoder. If an absolute encoder is not used, the value is always 0. The initial encoder position when switching on the controller (in user-defined units) can be read from this object. Object description Index 205Ah Object name Encoder Boot Value Object Code VARIABLE Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value 00000000h Firmware version FIR-v1446 Change history Firmware version FIR-v1512: "Access" table entry for subindex 00 changed from "read/write" to "read only".
205Ah Encoder Boot Value Function Tip: This object only has a function when using an absolute encoder. If an absolute encoder is not used, the value is always 0. The initial encoder position when switching on the controller (in user-defined units) can be read from this object. Object description Index 205Ah Object name Encoder Boot Value Object Code VARIABLE Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value 00000000h Firmware version FIR-v1446 Change history Firmware version FIR-v1512: "Access" table entry for subindex 00 changed from "read/write" to "read only".
Function Tip: This object only has a function when using an absolute encoder. If an absolute encoder is not used, the value is always 0. The initial encoder position when switching on the controller (in user-defined units) can be read from this object.
Object description Index 205Ah Object name Encoder Boot Value Object Code VARIABLE Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value 00000000h Firmware version FIR-v1446 Change history Firmware version FIR-v1512: "Access" table entry for subindex 00 changed from "read/write" to "read only".
